丁香实验_LOGO
登录
搜索
    搜索
    提问
    我要登录
    ｜免费注册
    点赞
    收藏
    wx-share
    分享

    BrdU Labeling Protocol

    互联网

    2718

    实验材料

    Materials Required But Not Provided

    1. BrdU reagent (Invitrogen Cat. No. 00-0103)

    2. Cytospin Tubes

    3. Phosphate-Buffered Saline

    4. 0.22 micron filter

    实验步骤

    1. Labeling with BrdU In Vivo

    1) Inject the animal with labeling reagent. As a general rule, 1 ml concentrated reagent per 100 g body weight is a suitable amount. Intraperitoneal injections are recommended for mice.

    Note: For larger animals use 10 ml per 1 kg of body weight.

    2) Wait 2 hours and sacrifice the animal. Remove the organs you wish to study.

    3) Process the tissue as necessary (frozen sections or paraffin embedding).

    4) Cut sections for immunohistochemistry.

    2. Labeling Culture Cells or Cell Suspensions in Flask

    1) Use a standard protocol to grow up cell cultures in vitro .
    2) Dilute the labeling reagent 1:100 (from concentrate) with complete tissue culture medium. Filter sterilize and warm to 37°C before use.
    3) Remove the cell culture medium, and replace it with the diluted labeling solution.
    4) Incubate cells at 37°C for 60 minutes to overnight. The optimum incubation time will depend upon cell type and the goal of the experiment.
    5) Prepare slides carrying cell monolayers by using one of the following procedures:

    · A. Cytospin preparation: Cytocentrifuge 100 µL of labeled cells at a concentration of 1-2 x 106 cells per ml directly onto cleaned slides and air dry.

    · B. Cell-smear preparation: Place one small drop of labeled cell suspension onto the end of a glass slide and spread into a thin film. This is easily accomplished using the edge of a second slide. Air dry at room temperature.

    6) Fix cells by placing slides in 70-80% alcohol or acid-ethanol for 20-30 min.
    7) Wash with PBS (3 times, 2 min. each) .
    8) Proceed with immunocytochemical staining techniques.

    3. Labeling Culture Cells on Chamber Slides

    1) Culture cells overnight on 4-well chamber slides.

    2) Prepare labeling solution by diluting labeling reagent 1:100 (from concentrate) with complete tissue culture medium. Filter, sterilize and warm to 37°C before use.

    3) Remove medium from chamber slides and replace with labeling solution.

    4) Incubate cells at 37°C in a CO2 incubator for 2 hours to overnight, depending upon the goal of the experiment.

    5) Remove labeling medium from cells and wash gently with PBS, 2 times.

    6) Fix cells with 70-80% alcohol or acid alcohol for 20-30 min.

    7) Wash with PBS (3 times, 2 min. each)

    8) Proceed with immunocytochemical staining techniques.

    4. Labeling of Tissue Slices

    1) Dilute the labeling reagent from 1:50 to 1:100 (from concentrate), using complete tissue culture medium. Sterilize by running through a 0.22 micron filter. Warm to 37°C before use. Prepare only the volume of labeling solution required for each experiment, while making sure there is enough labeling reagent to thoroughly immerse the specimen.

    2) Cut the tissue sample with a scalpel or sharp blade, making slices about 1mm thick and 2 mm2 in area. It is recommended that the cutting be performed in prewarmed tissue culture medium. This will help maintain tissue viability.

    3) Transfer tissue slices to a 15 ml cell culture tube filled with 10 ml of labeling medium, and prewarmed to 37°C. Incubate at 37°C in a CO2 incubator for the required labeling time. As an option, add 100 µL of 30% (v/v) hydrogen peroxide before sealing the tube, and incubate at 37°C in a conventional incubator. This time will vary, depending upon the type of tissue slices used, and the goal of the experiment (usually 2 to 4 hours). Discard any unused labeling medium.

    4) Wash tissue slices in PBS at 37°C (3 times, 5 minutes each).

    5) Fix the tissue using a frozen section protocol or embed in paraffin as necessary.

    相关产品推荐

    PE Antibody Labeling Kits（PE抗体标记试剂盒），阿拉丁

    PE Antibody Labeling Kits（PE抗体标记试剂盒），阿拉丁

    ￥1699.90

    Anti-BrdU/5-BrdU Antibody (SAA0559)

    Anti-BrdU/5-BrdU Antibody (SAA0559)

    ￥1968

    KTO: KIT A643 VALIDATION PROTOCOL (L)-Anatel A643a Accessories

    KTO: KIT A643 VALIDATION PROTOCOL (L)-Anatel A643a Accessories

    ￥50094

    oYo-Link® mIgG1 DM4 Antibody Labeling Reagent - Labels 1mg mIgG1 Ab

    oYo-Link® mIgG1 DM4 Antibody Labeling Reagent - Labels 1mg mIgG1 Ab

    ￥43858

    PerCP Antibody Labeling Kits（PerCP抗体标记试剂盒），阿拉丁

    PerCP Antibody Labeling Kits（PerCP抗体标记试剂盒），阿拉丁

    ￥2480.90

    相关问答

    问

    WB显出膜没有条带

    3020 围观
    2019-02-21

    问

    细胞增殖

    2577 围观
    2019-01-12

    问

    2小时能完成Western Blot实验，可能吗？

    3007 围观
    2019-01-07

    相关方法

    BrdU 检 测 丁 细 胞 和 B 细胞增殖

    Strep 标签蛋白纯化 protocol

    BrdU渗入法

    推荐阅读

    ( 共享）BrdU protocol

    BrdU Staining Protocol

    Genomic DNA Labeling Protocol

    提问
    扫一扫
    丁香实验小程序二维码
    实验小助手
    丁香实验公众号二维码
    扫码领资料
    反馈
    TOP
    打开小程序