ELASTIC VAN GIESON (EVG)

ELASTIC VAN GIESON (EVG)

1. Bring sections to water.

2. Acidified potassium permanganate 2 minutes

3. Wash in water

4. 1% Oxalic acid 1 minute

5 Wash in water

6. Wash in 70% alcohol (optional)

7. Stain in Weigerts Resorcin Fuchsin at room temperature for 45 minutes

8. Wash in water 10 minutes

9. Differentiate in acid alcohol

10 Wash in water

11. Stain in Van Gieson for 5 minutes

12. Wash in water

13. Dehydrate, clear . Mount sections in DPX

N.B. Do not wash too long after staining in Van Gieson dehydrate and clear quickly

 

---

SOLUTIONS :

Weigert Resorcin Fuchsin

--See E.P.S.R. Method

Van Gieson (Unnas Variant)

--Acid Fuchsin 0.25g

--Nitric Acid 0.5ml

--Glycerin 10ml

--Picric Acid To saturation

--Distilled water 90ml

Acidified Potassium Permanganate

--0.5% Potassium permanganate 950ml

--3% Sulphuric acid 50ml

NOTE: No responsibility is assumed by The University of Nottingham or the Queens Medical Centre NHS Trust for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions or ideas contained in the material herein. It is the users responsibilty to ensure that all procedures are carried out according to appropriate Health and Safety requirements.